Paddle boat is a new type of water park play equipment, it is not only environmentally friendly and energy-saving, but also can promote people’s sports, but also increase the fun of citizens to play, so it is popular with playgrounds like parks, so how much do you know about pedal boats?

The pedal boat is a popular park cruise ship today. What is the structure of the pedal boats for sale? Here is a brief introduction. The pedal boat rotates the impeller by pedaling, which is propelled by the impeller. The ship is flexible and convenient to move forward and backward. The control console is equipped with a handle. The rudder blades are linked through a connecting rod. The steering of the ship can be controlled by the control handle.

Pedal boat

Every boat has a body called the hull. Early ships were made of wood. Wheels with paddles were installed on both sides or stern of the ship. The wheels were turned manually, and the paddles dialed back to advance the ship. In current ships, the hull is mostly made of metal, powered by an engine, and uses propellers. All the hulls are hollow, so they are light in weight and can float on the water. The anchor is generally located at the bow of the ship, and there are anchors at the front and back, while the propeller is always installed at the stern.

Hull parts: The hull is composed of deck, side plates, bottom plate, keel, side keel, ribs, ribs, bow post, stern post and other components.

Keel: The keel is a longitudinal member connecting the bow column and stern column in the center of the base of the hull. It mainly bears the longitudinal bending moment of the hull. When making the model of the ship, it is necessary to choose a rectangular section of pine wood with straight wood grain and no knots.

1. The structure of the pedal boat. The general material of the pedal boat is glass fiber reinforced plastic. This structure is elastic and will not deform after a normal collision. The pedal boat hull has a long service life of heat and cold resistance, no worms, no rust, and low maintenance costs. The damage caused by special external force is also easy to repair, without affecting the use effect, retaining the original strength and rigidity.

Pedal boats are also made of different materials, such as wooden boats, glass and steel boats, and composite boats. However, nowadays we see the most fiberglass boats. Take the steel pedal boat as an example. Although its material is made of steel, the outermost is a brightly colored gel coat resin. The overall structure is elastic, and will not deform after a normal collision. The steel structure also makes the pedal boat https://bestonpaddleboats.com/ heat-resistant and cold-resistant with long service life, no worms, no rust, and low maintenance cost.

In autumn and winter, boats that are moored to the beach need to be rinsed and polished before covering the hood. Apply Vaseline to the fiberglass surface. This can prevent the appearance of cracks on the surface due to temperature, so the boat needs to be thoroughly cleaned before launching. Wash the surface of the hull and upper part of petroleum jelly. It is also necessary to polish the boat and sand it with fine sand. It should be noted that the sanding should be repeated once every quarter.

Pedal boat manufacturer

Under normal circumstances, we need to regularly check the state of the coolant, and also need to check the oil level in the fan belt and generator. When the electric boat for sale is activated, the seawater filter needs to be checked every 25 hours. The lubrication of the helm and nozzle also needs to be checked frequently, and it is also necessary to ensure the cleanliness of all aspects. Among the pedal boats of various materials, due to the superiority of their own materials, the fiberglass electric boat requires minimal maintenance, and the aging speed of the fiberglass is slow, even if the surface of the electric boat is protected Layer, but this protective layer will still be destroyed in daily use.